2 x DeVilbiss FLG-5 Gravity Spray Paint Guns 1 x 1.4mm Tip Gun & 1 x 1.8mm Tip Gun 9.8cfm Air Consumption DeVilbiss Trans-Tech Atomisation Technology. Air Inlet Thread - 1/4 Universal. Weight (gun & cup) - Gravity 642 gms, Suction 934 gms.
2 Guns [1 x 1.4mm & 1.8mmTip] Air Cap & Ring - Plated Brass, Cup capacity - Gravity 560 mls. 2 X FLG-G5 Gravity-feed Spray guns One fitted with a 1.4mm nozzle Ant the other fitted with a 1.8mm nozzle. The FLG-G5 Spray gun is approved to ATEX regulations 94/9/EC, protection level; II 2 G X.
Suitable for use in Zones 1 and 2 The FLG-G5 spray guns are not suitable for use with waterborne materials. The design uses EPA compliant atomising (DeVilbiss Trans-Tech®) technology to reduce overspray and improve coating efficiency. Nozzles and needles are manufactured in stainless steel.
These guns are not designed for use with highly corrosive and/or abrasive materials and if used with such materials it must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt regarding the suitability of a specific material contact our MDA Bitec customer services. Specifications: Air supply connection - Universal ¼ BSP and NPS Maximum static air inlet pressure - P1 = 12 bar (175 psi) Nominal gun inlet pressure with gun triggered - 2.4 bar (35 psi) Maximum service temperature - 40####x2103; Gun weight - 642 g Air flow - 277 l/min (9.8 cfm). Materials of Construction: Gun body - Aluminium Nozzle - Stainless steel Needle - Stainless steel Cup - Plastic. Please Note you get 2 x FLG-G5 Spray Guns with this listing one with a 1.4mm Tip and the other with a 1.8mm Tip.
The item "2 x DeVilbiss FLG-5 Gravity Spray Paint Guns 1 x 1.4mm & 1 x 1.8mm Tips" is in sale since Wednesday, November 15, 2017. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Air Tools\Spray Guns".
The seller is "mdabitec" and is located in Telford. This item can be shipped to all countries in Europe, United States, Canada, Australia.