Air Inlet Thread - 1/4 Universal. Weight (gun & cup) - Gravity 642 gms, Suction 934 gms.
Air Cap & Ring - Plated Brass, Cup capacity - Gravity 560 mls + Devilbiss HAV-501 Pressure Regulator. The FLG-G5 Gravity-feed Spray gun is fitted with a 1.4mm nozzle for topcoat applications.And is supplied with a the Devilbiss Air Pressure Regulator HAV-501-B The FLG-G5 Spray gun is approved to ATEX regulations 94/9/EC, protection level; II 2 G X. Suitable for use in Zones 1 and 2 The FLG-G5 spray guns are not suitable for use with waterborne materials. The design uses EPA compliant atomising Devilbiss Trans-Tech? Technology to reduce overspray and improve coating efficiency. Nozzles and needles are manufactured in stainless steel.
These guns are not designed for use with highly corrosive and/or abrasive materials and if used with such materials it must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt regarding the suitability of a specific material contact our MDA Bitec customer services.
Specifications: Air supply connection - Universal? BSP and NPS Maximum static air inlet pressure - P1 = 12 bar (175 psi) Nominal gun inlet pressure with gun triggered - 2.4 bar (35 psi) Maximum service temperature - 40? Gun weight - 642 g Air flow - 277 l/min (9.8 cfm). Materials of Construction: Gun body - Aluminium Nozzle - Stainless steel Needle - Stainless steel Cup - Plastic. DeVilbiss HAV-501-B Air Adjusting Valve.
Fits neatly in-line at the gun air inlet Can increase or decrease working pressure right at the gun Calibrated up to 11 Bar (160 psi). The item "Devilbiss FLG-5-14 Gravity Spray Paint Gun 1.4mm Tip + Finer Pressure Regulator" is in sale since Wednesday, February 20, 2019.This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Air Tools\Spray Guns". The seller is "mdabitec" and is located in Telford. This item can be shipped to all countries in Europe, Australia, United States, Canada.