Devilbiss FLG-5-18 Gravity Spray Paint Gun 1.8mm Tip + Finer Pressure Regulator

  

The new national lockdown will not effect our business. We will be aiming to dispatch all ours as advertised. Same day dispatch when placed before 12pm. Mondays may be the only exception depending on the orders received over a weekend.

Devilbiss FinishLine FLG-5 General Purpose Gravity Solvents Spray Paint Gun 1.8mm Tip 9.8cfm Air Consumption Devilbiss Trans-Tech Atomisation Technology + Devilbiss HAV-501 Finer Pressure Regulator. Air Inlet Thread - 1/4 Universal. Weight (gun & cup) - Gravity 642 gms, Suction 934 gms. Air Cap & Ring - Plated Brass, Cup capacity - Gravity 560 mls + Devilbiss HAV-501 Pressure Regulator. The FLG-G5 Gravity-feed Spray gun is fitted with a 1.8mm nozzle for topcoat applications. And is supplied with a none Devilbiss Air Pressure Regulator The FLG-G5 Spray gun is approved to ATEX regulations 94/9/EC, protection level; II 2 G X.

Suitable for use in Zones 1 and 2 The FLG-G5 spray guns are not suitable for use with waterborne materials. The design uses EPA compliant atomising Devilbiss Trans-Tech? Technology to reduce overspray and improve coating efficiency.

Nozzles and needles are manufactured in stainless steel. These guns are not designed for use with highly corrosive and/or abrasive materials and if used with such materials it must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt regarding the suitability of a specific material contact our MDA Bitec customer services. Specifications: Air supply connection - Universal? BSP and NPS Maximum static air inlet pressure - P1 = 12 bar (175 psi) Nominal gun inlet pressure with gun triggered - 2.4 bar (35 psi) Maximum service temperature - 40?

Gun weight - 642 g Air flow - 277 l/min (9.8 cfm). Materials of Construction: Gun body - Aluminium Nozzle - Stainless steel Needle - Stainless steel Cup - Plastic.

DeVilbiss HAV-501-B Air Adjusting Valve. Fits neatly in-line at the gun air inlet Can increase or decrease working pressure right at the gun Calibrated up to 11 Bar (160 psi). The item "Devilbiss FLG-5-18 Gravity Spray Paint Gun 1.8mm Tip + Finer Pressure Regulator" is in sale since Tuesday, February 5, 2019. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Air Tools\Spray Guns". The seller is "mdabitec" and is located in Telford.

This item can be shipped to all countries in Europe, Australia, United States, Canada.

1. Manufacturer Part Number: FLG-G5-18
2. Main Colour: Silver
3. Part Manufacturer: Devilbiss
4. Make: FinishLine
5. Type: Tools
6. Manufacturer: Devilbiss
7. MPN: FLG-G5 1.8mm Air Gun Lacquer TopCoat + HAV501
8. Quantity: 1
9. Item Type: Tools
10. Other Part Number: FLG-G5-18/HAV-501
11. Weight: 1.27
12. Sub-Type: Spray gun
13. Colour: Silver
14. Country/Region of Manufacture: United Kingdom
15. Brand: Devilbiss
16. Number of Pieces: 1
17. EAN: 3514054514811