Fuji Spray Semi-PRO 2 M-Model HVLP Paint Gun 400cc Gravity Feed Cup 1.3 mm

  
New open box item, never used. Semi-PRO 2 M-Model HVLP Paint Sprayer Gun with 400cc Gravity Feed Cup and 1.3 mm Air Cap Set HVLP Paint Sprayer System. Fuji Spray has introduced the most powerful 2-stage system on the market. The Fuji Spray Semi-PRO 2 Gravity model offers features like no other in its price range. The Fuji M-Model Spray Gun has professional features such as non-bleed and a Fan Control Knob to adjust pattern size from small circular to wide (and all increments in between). A super-powerful 1400-Watt 2-stage bypass motor in a metal turbine case with handy gun holder. HVLP Systems typically feature low wattage motors that are underpowered for most spraying. Our 2-stage version can handle any type of coating.

The Semi-PRO 2 Gravity model is for the serious user. Professional non-bleed spray gun with adjustable pattern fan control.

1.3 mm air cap set installed. Metal turbine case with handy gun holder. Dimensions: H 15.5 in, W 15.5 in, D 14 in.

Compatible Paint Type: Exterior Paint, Interior Paint, Polyurethane/Lacquer, Primers, Sealers, Stains. Adjustable Fan Pattern, Adjustable Pressure, Built-in Stand, Gravity Feed, Quick Release. Operating Pressure (psi): 5.5.

Paint Sprayers Product Type: HVLP. Performance Features: Adjustable Spray Width, Air Flow Valve, Fan Control Screw, Flow Control, Fluid Control Valve, Low Overspray.

Spray Tip Pattern Size in. Trigger Configuration: One Finger Trigger. Hi-FlexTM Hose 25ft (7.6m). Turbine dimensions: 11"x8.6"x8.1.

Most common questions and answers. Q: Do I need a compressor?

A: The Semi-PRO 2 Spray System is a self-contained spray system; the Turbine unit has a motor installed in it that produces approximately 5psi. No compressor or additional equipment will be needed to operate the spray system; comes with the Turbine unit, 25ft air hose and M-Model spray gun (installed with a 1.3mm air cap set). Q:Can you spray water based poly such as Milesi? A: Yes, waterborne polyurethanes can be sprayed with Semi-PRO 2 systems. Q: I'm looking to get a factory finish for Kitchen Cabinets, will this work if I use a water based..

A: These will handle stains, polyurethanes and clear lacquers well. Higher viscosity materials, including tinted lacquers, will be able to be lay down adequately.

Q:Can you use this to spray two part epoxy paints? A: The Semi-PRO 2 system is capable of spraying two part epoxy with adequate results. Dilution and adjustment to a larger air cap set based on the viscosity will be required. Q:Is small paint container feasible for staining large fence. Can you suction from 5 gallon container?

A: It is possible to paint a fence using the 400cc gravity cup, however refilling the cup will be necessary. It is not possible to suction from a 5 gallon container. Q: Can it spray lacquer paint?

A: The Semi-PRO 2 is capable of spraying lacquer paint. Thinning of the material and the use of the appropriate air cap set based on the viscosity will be required. Q:Can you spray clear coats and what do you need to do to make it work probably during spraying clear coats.

A: The Semi-PRO 2 is capable of spraying clear coats. Thinning the material and using the correct air cap set based on the viscosity will be required to achieve a proper quality of finish. Q:Can this be used to spray stain on fence? The Semi-PRO 2 spray system is ideal for all outdoor coatings applications such as patio furniture and fences. Q: Can I use this with different guns? I have a couple specialty guns for large projects but want the turbine. A: As long as the spray guns are designed for the use with a HVLP Turbine unit - this will not be a problem.