Wide Application --- Pressure pot spray gun kit, The paint sprayer pot is suitable for commercial painting and large volume painting including automotive, oil-based, latex, varnishes, lacquers, primers, wood coatings, adhesives, etc Repair pipes-After use, clean the lance with water. The cleaning method is as follows: 1. Wash water with a diluent or spray gun and spray it constantly from the body. After cleaning, turn off the paint material and hang it up for drying. Remove the needle, atomizer cap, soak once a week with thinner, rinse and dry, apply some gas oil, and install on the lance.
Note the white seal tape at the nozzle interface to ensure the gun' s seal. If the paint has a high viscosity, you can apply it every two or three days. If the sprayer is well maintained, it can extend its service life and maximize its value.Specifications: Material: Aluminum Alloy Capacity: 2L / 0.5 gallon Pot Size: 1221cm Air Inlet: 1/4" (6.35 mm) Dope Outlet: 3/8" (9.5 mm) Hose Length: 3m (10ft) Package Weight: 3000g/105.8oz Package Size: 352515cm/13.89.85.9in Package List: 1 Air Paint Sprayer set. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Paint Sprayers & Accessories\Paint Sprayers". The seller is "2018wondercoshine002" and is located in this country: CN. This item can be shipped worldwide.