Hotcoat PCS-250 Economical Dual Voltage Powder Coating Gun Standard 120v 60 Hz

  

The Eastwood PCS-250 Dual-Voltage HotCoatT Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint.

This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. This new and improved gun features color-coded cabling, larger ground clamp, increased trigger room and a clear bottle so you can see the powder color and fluidizing action. The PCS-250 Dual-Voltage HotCoat gun is one of the best powder coating guns on the market today.

Because it gives you one of the most economical, color-durable and longest-lasting finishes available. You'll find powder coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available.

And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections. Bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy since you can simply sweep-up the over-sprayed powder. This powder can be reused as well if it's not contaminated.

Eastwood powders contain no environmentally harmful solvents so you can be planet-conscious as well. HotCoat powder coating requires a 5-10 psi compressed air source and a dedicated electric oven (or toaster oven). Powder Coat in Your Own Garage.

Owning a dual-voltage electric powder coating gun means you can apply this technique to springs, valve covers, tri-flow radiators, vehicle body panels and anything else that needs a quality finish. One quick-change empty powder bottle is included and you can easily add more. The tool is designed to our exact specifications with a handheld activation switch, air inlet, removable diverter tip and grounding system. Coat and cure in under an hour! Operates on standard 120v / 60Hz household current.

Versatility with two settings for improved coverage. High 25,000-volt setting for multi-coat coverage over larger areas.

Color-Coded cables for easy setup. More trigger-room for additional comfort. Clear bottle allows you to see powder color, level and fluidizing action. Larger internal passages for improved powder flow.

Refined power supply for more consistent coverage and powder-build. The PCS-250 Dual Voltage HotCoat gun is one of the best powder coating guns on the market today, plus it's new and improved.

Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. Bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents.

HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven). PCS-250 Dual-Voltage HotCoat Powder Coating Gun, dual-voltage power supply, activation switch, ground clamp and cable, and an empty 8-oz. Powder, like common flour, can be explosive when suspended in the air in high concentrations.

To minimize any explosion risk, sweep up-do not vacuum-powder from the floor. Cure powder in a well-ventilated area.

The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh filter cartridges when curing or inspecting flow-out progress. Attention California Residents - Proposition 65. The Ultimate Beginners Guide to Powder Coating - How to Powder Coat at Eastwood YouTube.