Powder Coating System Machine With Tank Spray Gun Paint System 550g/Min WX-101 DIY

The price of this product is far lower than new one, GREAT DEALS! Some accessories are in good condition, but the damage degree of the product cannot be confirmed. Please refer to the pictures and think carefully before you place an order. We will offer assistance here within 24 hours.

Powder Coating Machine adopts high-quality stainless steel; it has the advantages of rust prevention, corrosion resistance, acid and alkali resistance, etc. The appearance is smooth and smooth, and the workpiece has no dead angle. Electrostatic Spraying Equipment features two interior gas design, so that the needle is no longer needle-guided fluid powder, to enhance the discharge effect, improve the rate of the powder.

Rotating atomized airflow can significantly improve the quality of the coating. Large flow of pneumatic components, in the smaller air pressure, Electrostatic Spraying Equipment can still achieve higher powder.

Thickening resistance to puncture the tip, the low maintenance rate. With circuit protection, voltage self-adjusting function, to ensure a perfect spraying effect. High voltage module near the nozzle, low voltage loss, replaceable high voltage components to bring convenience to the maintenance. Powder coating setup is widely used in home appliances, hardware, security doors (windows), heat sinks, construction, auto parts, sports equipment, medical equipment, aluminum, and other industries. The powder bucket is made of stainless steel, with a humanized design, and the widened frame increases the load-bearing capacity.

Each function is clearly labeled and easy to adjust. The powder is smooth and sprayed evenly, which is convenient for your use. Electrostatic Manual Powder Coating has an oil-water separator.

Filter water, oil, and clean gas in the compressor to ensure efficient separation effect. Ctrostatic has four universal wheels, a mobile push-pull wheel design, easy to move, save time and effort, suitable for a variety of working environments.

The Powder Coating Gun is durable and lightweight, and the powder output effect is efficient and smooth. The Spraying Gun Paint adopts an ergonomic handle design to reduces the pressure caused by long-term spraying force on the arm. Electrostatic powder spraying equipment is widely used in home appliances, hardware, security doors and windows, construction, auto parts, sports equipment, medical equipment, and other industries.

Electrostatic Powder Coating Machine is a dry finishing process, using finely ground particles of pigment and resin that are generally electrostatically charged and sprayed onto electrically grounded parts. The charged powder particles adhere to the elements and are held there until melted and fused into a smooth coating in a curing oven. Electromagnetic Valve Control Power Voltage: DC 24V. Input Air Pressure: 0-0.6Mpa. Output Air Pressure: 0-0.5Mpa. Length Of Gun Cable: 4 m. V/N Weight: 35 kg/28 kg. Powder Coating Applicable: All Kinds Of Powder Without The Metals. Powder Coating Machine Electrostatic has four universal wheels, a mobile push-pull wheel design, easy to move, save time and effort, suitable for a variety of working environments. 1 × Manual Powder Gun With Gun Cable. 1 × Powder Gun Spare Parts. 1 × Fluidized Powder Hopper. 1 × Pressure Regulating Valve. 1 × Powder Hose , Air Tubes , Grounding Line. 2.5 Gallons Paint Point Manual. 2.5 Gallons Paint Point Auto. 2.5 gallons / 10 L.

4 gallons / 16 L. 0.5 gallons / 2 L.

1/4 / 6.35 mm. 3/8 / 9.5 mm. 1.8 mm Nozzle Kit. 2.5 Gallons Paint Point. 8 gallons / 30 L.

10 gallons / 40 L. 11 gallons / 45 L. Air Regulator + Safety Valve. Manual Powder Gun + Gun Cable. CA & TX & NJ & GA & NC &OR WAREHOUSE. California Warehouse: City of Industry, CA.

New York State Warehouse: Perth Amboy, NJ. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you.

Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.

All emails will be responded to within 12-24 hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. The item "Powder Coating System Machine With Tank Spray Gun Paint System 550g/Min WX-101 DIY" is in sale since Thursday, November 11, 2021.

This item is in the category "Business & Industrial\Building Materials & Supplies\Industrial Paint, Coatings & Supplies\Paint Sprayers & Striping Machines". The seller is "bestplus-well" and is located in Rowland Heights, California. This item can be shipped to United States, Canada.

Horsepower: Does Not Apply
Model: 45L powder coating machine
Custom Bundle: No
Item Height: 66cm
Item Width: 52cm
Operating Pressure: 0-0.5Mpa
Compatible Material: Exterior Paint
Type: Spray Gun
Color: Silver
MPN: PWFRC00601635229730
Item Weight: 28 kg
Brand: Unbranded
Power Source: Air
Features: Air Flow Control
Power: 40W
Suitable For: Commercial,Door
Power Voltage: AC110V
Sprying Rate: 550g/min
Input Power: 40W
Input Air Pressure: 0-0.6Mpa
Output Air Pressure: 0-0.5Mpa
Max.
Air Consumption: 13.2m3/H
Output Power Voltage: 0-100kv
Powder Hopper Volume: 45L