Sewinfla Inflatable Paint Booth Portable Car Spray Booth & 1-3 Blowers 13 Size

  
Professional Upgrade More Durable More Efficient Special inflatable products Oxford cloth manufacturing. High strength, wear resistance, good water resistance, light weight, resistance to twists and turns, anti - static.

High quality 210D oxford fabric with PU coating strengthens the durability of car paint booth. Double-stitched reinforced sewing applied to prolong its service life. More professional and scientific design The improved front door design also allows for easy access by people and cars.

Two stages of double - layer filter to ensure spray paint working environment to reduce exhaust pollution. Dust-free and insect-free painting work space Fully enclosed dust-free working space, new design of upper and lower convection ventilation system, more efficient and convenient. Ventilation wind intensity can be adjusted. Filtered air into the paint area, clean air to make better paint effect. Dirt tolerant design Our Booth material uses the brand specific custom iron grey Oxford cloth.

Make car painting booth more resistant to dirt. We also place belt loop at the bottom of each air column in the workspace to allow you to secure additional padding at the bottom to further protect paint booth from dirt. Upgrade accessories package includes needle, thread, large size nail for fixing, nylon rope, mending cloth, reinforced Oxford cloth sandbag.

Our booth is stock in US warehouse. 3.8x3.5x3.5m/12.5x11.2x11.2Ft. This size is NOT allowed to enter the car. Material: Oxford cloth for 210D inflatable products / 0.4 mm PVC PRODUCTION PROCESS: Every structural line of booth of SEWINFLA brand is double-stitched.

Support Voltage: 110V US Plug Approx. External Dimensions After Inflated: 12.5x11.2x11.2Ft Approx. 1 X Inflatable Paint Booth 1 X Accessories package(Ropes, needles, thread, nails, instruction manual, sandbags, Repair cloth) 1 X Daily storage bag. 1 UL 450W + 1 X 750W Blower in a box.

The blowers and booth in a box. 4x2.5x2.5m+/13x8.2x8.2Ft. Cloth for 210D inflatable products / 0.4 mm PVC. PRODUCTION PROCESS: Every structural line of booth of SEWINFLA brand is double-stitched. Support Voltage: 110V US Plug.

External Dimensions After Inflated: 13x8.2x8.2Ft. Internal Working area Dimensions: 11.5x6.9x7.2Ft. 1 X Inflatable Paint Booth. 1 X Accessories package(Ropes, needles, thread, nails, instruction manual, sandbags, Repair cloth). 1 X Daily storage bag.

It's separated one box. Please notice to check and receive them.

External Dimensions After Inflated: 20x10x8Ft. Internal Working area Dimensions: 15x7.2x7.5Ft. The blower and booth in one box.

External Dimensions After Inflated: 20x13x8.5Ft. Material: Oxford cloth for 210D inflatable products / 0.4 mm PVC. External Dimensions After Inflated: 23x13x8Ft. Internal Working area Dimensions: 14.4x10.2x6.6Ft. 1 X 450W + 1X 950W UL Blowers.

The blowers and booth will be delivered separately. External Dimensions After Inflated: 23x20x14.5Ft. Internal Working area Dimensions: 21.5x18.5x13Ft. 1 X 750W UL Blower + 1X 950W UL Blower.

External Dimensions After Inflated: 26x13x10Ft. Internal Working area Dimensions: 20.4x10.2x8.6Ft.

External Dimensions After Inflated: 26x15x10Ft. Internal Working area Dimensions: 20.4x11.5x8.6Ft. 1 X 750W + 950W UL Blowers. External Dimensions After Inflated: 28x15x11Ft.

2 X 950W UL Blowers. External Dimensions After Inflated: 30x20x13Ft. Internal Working area Dimensions: 24.4x17.2x11.6Ft.

1 X750W UL Blower + 2X950W UL Blowers. External Dimensions After Inflated: 33x16x11Ft. Internal Working area Dimensions: 27.4x13.2x9.6Ft.

1 X750W Blower + 2X950W UL Blowers. External Dimensions After Inflated: 39x16.5x13Ft. Internal Working area Dimensions: 33.4x13.2x11.6Ft. 1 X 750 UL Blower + 2X 950W UL Blowers.

External Dimensions After Inflated: 39x20x13Ft. Internal Working area Dimensions: 33.4x17.2x11.6Ft. 3 X 950W UL Blowers.

DON'T USE OUTDOORS IN BAD WEATHER: Thunderstorm, rainy, windy, snowy weather. Don't use paint booth outdoors. Booth is not a rainproof product. Don't use sharp things, such as knives to scratch it.

Be sure to open the vent cover when starting painting. If the cover is not opened, booth may be torn due to high pressure. Booth has a hook for a lamp on top. Use power to prevent leakage in booth. Booth heating tool use please be careful not to touch the cloth.

In winter, when the outdoor temperature is too low, it is recommended to find an indoor warehouse to keep warm and use booth. Air Draft Device for Indoor.

When indoor paint Booth is used, the aerodynamic failure of Booth will be caused by closed indoor air. The exhaust matching equipment, combined with the exhaust fan and exhaust pipe, can very well solve the problem that booth has no flowing air in the room. This product is specially customized. Applies only to Sewinfla specified Paint Booth. Please provide booth order number of Sewinfla brand when purchasing. Products include support paint iron frame, PVC cover. Does NOT INCLUDE exhaust fan and exhaust pipe. The filter is used for primary filtration of paint particles.

The unique 3D honeycomb structure greatly improves the adsorption effect. When replacing, please face the honeycomb side towards the inside of the booth and the white side towards the outside of the booth. Then install the black activated carbon layer and fix the edge of the Velcro. The filter adopts a new 3D three-dimensional honeycomb structure, which can more effectively absorb paint particles and impurities generated during painting.

Meanwhile, the new filter has been registered with the EPA. Please note: this filter is only applicable to Sewinfla inflatable spray paint booth. It cannot be applied to booths of other brands. Please wear gloves when changing the filter.

Please use this filter to replace the original green glass fiber filter in the Sewinfla booth and keep the black activated carbon filter layer. The filter has been used for about 20 times and needs to be replaced. The item "Sewinfla Inflatable Paint Booth Portable Car Spray Booth & 1-3 Blowers 13 Size" is in sale since Wednesday, February 24, 2021. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Paint Booths". The seller is "screatewh" and is located in Buford, Georgia.

This item can be shipped to United States.

1. Modified Item: No
2. Country/Region of Manufacture: China
3. Custom Bundle: Yes
4. Input Voltage: 110V
5. Color: Iron Gray
6. Filter System: Glass fiber filters +Activated carbon filters
7. PRODUCTION PROCESS: Every structural line is double-stitched
8. Filter: Filter Replaceable
9. Manufacturer Part Number: Does Not Apply
10. Brand: SEWINFLA
11. Non-Domestic Product: No
12. Warranty: 2 Year
13. Bundle Description: UL Blowers