Tamiya Air Brush System No. 53 Spray Work Power Compressor 74553 100V 50/60Hz

  
Tamiya Air Brush System No. 53 Spray Work Power Compressor 74553 100V 50/60Hz.

This compressor is indispensable for supplying air for spray painting with an airbrush. With a maximum pressure of 0.4MPa, it is powerful enough for airbrush painting, from big scale models with large painting areas to glossy painting of car model bodies. The air regulator with a meter allows you to freely adjust the pressure. It can also be used for thin spraying with reduced air pressure, such as fine camouflage painting on military models. Furthermore, it features excellent workability thanks to the use of a power switch built into the hanger.

Continuous air pressure guide ITEM74532 Spraywork HG Airbrush III (nozzle diameter 0.3mm): Approx. 0.28MPa (at 60Hz) ITEM74523 Spray Work HG Air Brush Wide (Trigger Type) (Nozzle Diameter 0.5mm): Approx. 0.18MPa (at 60Hz) Even if the nozzle diameter is the same, air brushes from other manufacturers may have a pressure of 0.1 MPa or less.

For household power supply (AC100V, 50/60Hz) only? Body dimensions W24cm x D14, 5cm x H20cm? Maximum air pressure approximately 0.4MPa (60PSI)?

Continuous air pressure approximately 0.24/0.28MPa (50/60Hz)? Air discharge rate 9/12L/min (50/60Hz, 0.2MPa)? Accessories Air regulator, air brush stand with switch function, fixing clamp, hose? Continuous use time 40 minutes. Note: Continuous air pressure varies depending on the connected air brush.

[Guideline for continuous air pressure] ITEM74532 Spraywork HG Airbrush III (nozzle diameter 0.3mm): Approx. Or Japan Post or others. Due to the current situation, arrival may be delayed. We do not mark merchandise values below value or mark items as "gifts" - Japan, US and International government regulations prohibit such behavior. Thank you for your understanding.